WIN System
Repeater Build Specification Sheet
Repeater for:_______________________________________________________
Date:___/___/___
Make:___________ Model:____________________ TX:______._____ MHz
RX:______._____ MHz
TX
Power Output:_______ Watts
RX Sensitivity: Open Sq:_______ uv
20-dB Quieting:_______ uv
Audio
Through-Put Frequency Response (Sweep Test) into RX at 3 kHz deviation,
TX deviation is:
Audio
Freq Deviation
Audio Freq
Deviation
Audio Freq
Deviation
300 Hz =_______ kHz
1,300 Hz =_______ kHz
2,300 Hz =_______ kHz
400 Hz =_______ kHz
1,400 Hz =_______ kHz
2,400 Hz =_______ kHz
500 Hz =_______ kHz
1,500 Hz =_______ kHz
2,500 Hz =_______ kHz
600 Hz =_______ kHz
1,600 Hz =_______ kHz
2,600 Hz =_______ kHz
700 Hz =_______ kHz
1,700 Hz =_______ kHz
2,700 Hz =_______ kHz
800 Hz =_______ kHz
1,800 Hz =_______ kHz
2,800 Hz =_______ kHz
900 Hz =_______ kHz
1,900 Hz =_______ kHz
2,900 Hz =_______ kHz
1,000 Hz
=_______ kHz
2,000 Hz =_______ kHz
3,000 Hz =_______ kHz
1,100 Hz
=_______ kHz
2,100 Hz =_______ kHz
1,200 Hz
=_______ kHz
2,200 Hz =_______ kHz
Controller:________________________________________________________________________
Wiring Color-Code:
RED/BLK = 12 VDC Power
ORG = PTT Line GRN
= COS Active Low____________________
YEL = COS Active
High_____________________ WHT
= CTCSS Detect_____________________
___ = __________________________________
RG-174 coax = Audio line, the audio always travels in the direction of
the writing on the cable.
Misc:____________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
Warranty: Because your
repeater is a used radio, I offer no warranty on the radio itself.
I do warrant any new components I have added, such as the CTCSS
decoder, Squelch Board, Controller, etc. for one year after
installation. I shall
provide labor services to the original buyer for as long as he owns the
repeater, only parts used for a repair will be charged, as well as
return freight. |